Appendix 5 Instructions For Eac - Mitsubishi Electric FR-XC-18.5K-PWM Instruction Manual

Fr-xc series multifunction regeneration converter
Table of Contents

Advertisement

Wiring
• Wiring between the multifunction regeneration converter and an inverter
Refer to the National Electrical Code (Article 310) regarding the allowable current of the cable. Select the cable size for
125% of the rated current according to the National Electrical Code (Article 430).
Use the UL listed copper stranded wire (rated at 75°C) for wiring between an inverter and the multifunction regeneration
converter (terminals P/+ and N/-) and between the multifunction regeneration converter and a reactor installed on the input
side of the converter (terminals R2/L12, S2/L22, and T2/L32). To wire the terminals, use the UL listed crimp ring terminal
employing insulation tubing.
• The FR-XCB reactor is a UL listed option for use only with the following converter. (Refer to
FR-XCB model
FR-XCB-18.5K
FR-XCB-22K
FR-XCB-37K
FR-XCB-55K
Short circuit ratings
• 200 V class(FR-XC-[]K)
Suitable for use in a circuit capable of delivering not more than 100 kA rms symmetrical amperes, 240 V maximum.
• 200 V class(FR-XC-[]K-PWM)
Suitable for use in a circuit capable of delivering not more than 100 kA rms symmetrical amperes, 230 V maximum.
• 400 V class(FR-XC-H[]K)
Suitable for use in a circuit capable of delivering not more than 100 kA rms symmetrical amperes, 500Y/290 V maximum.
• 400 V class(FR-XC-H[]K-PWM)
Suitable for use in a circuit capable of delivering not more than 100 kA rms symmetrical amperes, 480Y/277 V maximum.
Appendix 5
The product certified in compliance with the Eurasian Conformity has the EAC marking.
Note: EAC marking
In 2010, three countries (Russia, Belarus, and Kazakhstan) established a Customs Union for the purposes of revitalizing the
economy by forming a large economic bloc by abolishing or reducing tariffs and unifying regulatory procedures for the
handling of articles.
Products to be distributed over these three countries of the Customs Union must comply with the Customs Union Technical
Regulations (CU-TR), and the EAC marking must be affixed to the products.
For information on the country of origin, manufacture year and month, and authorized sales representative (importer) in the
CU area of this product, refer to the following:
• Country of origin indication
Check the rating plate of the product. (Refer to
Example: MADE IN JAPAN
• Manufactured year and month
Check the SERIAL number indicated on the rating plate of the product. (Refer to
• Authorized sales representative (importer) in the CU area
The authorized sales representative (importer) in the CU area is shown below.
Name: Mitsubishi Electric (Russia) LLC
Address: 52, bld 1 Kosmodamianskaya Nab 115054, Moscow, Russia
Phone: +7 (495) 721-2070
Fax: +7 (495) 721-2071
Applicable converter model
FR-XC-22K
FR-XC-18.5K-PWM
FR-XC-30K
FR-XC-22K-PWM
FR-XC-37K
FR-XC-37K-PWM
FR-XC-55K
FR-XC-55K-PWM
Instructions for EAC
page
FR-XCB model
FR-XCB-H18.5K
FR-XCB-H22K
FR-XCB-H37K
FR-XCB-H55K
10.)
page
160.)
Applicable converter model
FR-XC-H22K
FR-XC-H18.5K-PWM
FR-XC-H30K
FR-XC-H22K-PWM
FR-XC-H37K
FR-XC-H37K-PWM
FR-XC-H55K
FR-XC-H55K-PWM
page
10.)
APPENDIX
181

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents