Removal And Reinstallation Of The Fr-Xcb Reactor Cover - Mitsubishi Electric FR-XC-18.5K-PWM Instruction Manual

Removal and reinstallation of the FR-XCB reactor cover

2.2
Removal and reinstallation of the FR-XCB
reactor cover
 Removal
• Loosen the mounting screws of the cover.
 Reinstallation
• Align the screw holes on the cover with the holes on the
reactor, and place the cover back into position.
NOTE
• After installing the front cover, check that it is fixed securely in place. Always tighten the mounting screws of the cover.
• The capacity plate is placed on the cover, and the rating plate is on the remainder of the reactor box. Before reinstalling the
cover, check the serial number on the capacity plate against the one on the rating plate to make sure they are identical with
each other.
28
INSTALLATION AND WIRING
●FR-XCB-(H)18.5K, 22K
Cover
●FR-XCB-(H)37K or higher
Cover
●FR-XCB-(H)18.5K, 22K
Cover
●FR-XCB-(H)37K or higher
Cover
• Pull out the cover to remove it.
Cover
Cover
• Tighten the mounting screws of the cover (tightening
torque: 1.7 Nm).
Cover
Cover