View Device - BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions

Browsing Alarm Web Pages (Cont.)

View Device

1. From the Network Devices page, click
View to view the status of a remote
device (Figure 101).
2. Click Refresh to view the most recent
information.
3. Click the Back to Network Devices to
return to the Network Devices page.
NOTE:
The View Device page provides a snapshot of
the current alarm remote device. If the status
changes the page is not updated until the page
is reloaded by clicking on Refresh link.
Figure 101: View Remote Device
107
6-847718-00 Rev. B00