BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions page 46

Finish
Labeling (Cont.)
Digital Display Module
Label each digital display module using
provided location labels.
1. Mark location on location label.
2. Slide location label into pocket in front
of digital display module (Figure 37).
Multi-Signal Module
Label each multi-signal module using
provided system status labels.
Blank system status labels are provided for
custom signal names.
1. Slide system status labels into pockets
in front of multi-signal module
(Figure 38).
Sensor Module
1. Mark location monitored by sensor in
space provided on sensor label
(Figure 39).
44
6-847718-00 Rev. B00
Slide label into slit in
front panel overlay
Figure 37: Digital Display Module
Figure 38: Multi-Signal Front Panel Labeling
Figure 39: Sensor Module Location Label
Label
(provided)
Label
(provided)
Slide label(s) into slits
in front panel overlay
Location label