Clear Event Log - BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions

Set-Up Using Web Pages (Cont.)

Clear Event Log

1. Click Clear Event Log to access the
Clear Event Log page (Figure 87).
2. Click Clear Event Log.
3. The confirm clear event log dialog will
be displayed (Figure 88).
4. Click OK to clear the event log.
5. The Event Log page will display
(Figure 89)
96
6-847718-00 Rev. B00
CAUTION:
Be sure to save the event log prior to clearing it.
It is impossible to recover the event log after it is
cleared.
Figure 87: Clear Event Log
Figure 88: Confirm Clear Event Log