Electronic Notification - BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions

Set-Up Using Web Pages (Cont.)

Electronic Notification

This setup page is used to configure elec-
tronic notification (email, pager, phone text
message). The device acts as an SMTP
client. An SMTP server is required for
electronic notification to function.
1. Click Electronic Notification to access
the Electronic notification page
(Figure 74).
2. Enter up to five email addresses then
click Submit.
3. The Email Setup Accepted page will be
displayed (Figure 75).
88
6-847718-00 Rev. B00
NOTE:
Refer to your mobile device provider for text
message email address format.
NOTE:
Email address 1 is also used as the email sender.
Figure 74: Electronic Notification
Figure 75: Email Setup Accepted