Network Statistics - BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions

Browsing Alarm Web Pages (Cont.)

Network Statistics

1. From the Diagnostics page, click
Network Statistics to view the Network
Statistics page (Figure 107).
2. Click Refresh to view the most recent
information.
NOTE:
The Network Statistics page provides a
snapshot of the network statistics. The page is
not updated until the page is reloaded by
clicking on Refresh link.
Network Statistic Definitions:
IP Address
Current IP address used by the device.
Subnet Mask
Current Subnet Mask used by the device.
Gateway
Current Gateway address used by the device
Primary DNS
Current Domain Name Server address used by
the device.
MAC Address
Device's unique Ethernet address.
Received Packets
Number of Ethernet packets received (including
broadcast and unicast).
Unicast Packets
Number of Ethernet unicast packets sent.
Broadcast Packets
Number of Ethernet broadcast packets sent.
SMTP Server IP
SMTP (Email) Server IP address.
SMTP Server Name
SMTP (Email) Server name.
MEGAIO Sends
Local RS-485 packets sent from annunciator
module to other alarm modules.
112
6-847718-00 Rev. B00
MEGAIO Receives
Number of local RS-485 packets received by
annunciator module from other alarm modules.
MEGAIO Collisions
Number of local RS-485 collisions detected.
MEGAIO Framing Errors
Number of local RS-485 framing errors
detected.
MEGAIO Overrun Errors
Number of local RS-485 buffer overrun errors
detected.
MEGAIO Retries
Number of local RS-485 packets re-sent by
annunciator module.
MEGAIO Timeouts
Number of local RS-485 commands sent by
annunciator module with no response received.
MEGAIO Bad Checksum
Number of local RS-485 packets received with
incorrect checksum.
MEGAIO Bad Data
Number of local RS-485 packets received with
incorrect data in the message.
Peer Requests
Number of remote area data requests sent by
master or combo alarm.
Peer Responses Received
Number of remote area data responses
received by master or combo alarm.
Peer Responses Sent
Number of remote area data responses sent by
area or combo alarm.
Peer Retries
Number of remote area data requests re-sent
by master or combo alarms.
Peer ARP Timeouts
Number of remote area data request ARP
timeouts.
Peer No Memory
Number of attempts to add another device
when the device list is full (Already 75 remote
devices).