Signals - BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions

Browsing Alarm Web Pages (Cont.)

Signals

1. Click Signals to view all local signals
monitored by this alarm panel
(Figure 99).
2. Click Refresh to view the most recent
information.
3. Click on Module # link to view alarm
module details.
NOTE:
The Alarm Signals page provides a snapshot of
the current alarm conditions. If a new alarm
occurs, the page is not updated until the page is
reloaded by clicking on Signals or Refresh links.
Source Alarm Signals
Local alarm signals for switched alarm
signals from a multiplexer or multi-signal
module.
Digital Display Modules
Local alarm signals for digital display
modules.
Figure 99: Signals
105
6-847718-00 Rev. B00