Wire Routing - BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions

Pull Wire (Cont.)

Wire Routing

Two holes or knockouts are provided for
entrance of AC mains power. One hole
on left side and one hole on top left of
alarm panel back box.
NO OTHER HOLES SHOULD BE
PUNCHED OR USED.
Several additional holes or knockouts are
provided on right side of top panel and
bottom for entrance of low voltage field
wiring(Figures 21 and 22).
28
6-847718-00 Rev. B00
Two choices of Knockouts for entrance of
conduit knockouts low voltage field wiring
for entrance of AC
mains power
Figure 21: Wire Routing for Master / Combo Alarms
Two choices of
conduit holes for
entrance of AC
mains power
For top entry, remove
shield for access.
Reinstall shield after
connection is made
Figure 22: Wire Routing for Area Alarms
Knockouts for entrance of
low voltage field wiring
Holes for entrance of
low voltage field wiring