Login In To Setup Pages - BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions

Set-Up Using Web Pages (Cont.)

Login in to Setup Pages

1. Click Log in and Setup or Login on the
left pane.
2. The web browser will request a
username and password (Figure 57).
3. The factory defaults are:
Username: new
Password: new
4. The left sidebar will now contain the
setup links (Figure 58)
NOTE:
Logging in applies only to the computer on
which the login occurs. If more than one PC is
being used to access the alarm web pages,
each one must be logged in individually. The
computer stays logged in until the user closes
the browser.
WARNING:
Change the factory programmed password after
the first time you log in. Otherwise, inappropriate
personnel may change settings which could
endanger patient welfare. Refer to Administer
Users on page 91.
Figure 58: Logged in
Figure 57: Login Dialog
6-847718-00 Rev. B00
77