Electronic Notification - Server Setup - BeaconMedaes TotalAlert 2 Installation, Operation And Maintenance Instructions

Set-Up Using Web Pages (Cont.)

Electronic Notification - Server Setup

1. Click Electronic Notification to access
the Electronic notification page
(Figure 74).
2. Click on the link to set up email server
(Figure 76).
3. Enter the SMTP server name or IP
address then click Submit.
4. The Email Server Setup Accepted page
will be displayed (Figure 77).
NOTE:
Obtain the SMTP server name or IP address from
the facility's Information Systems department.
NOTE:
SMTP Server Address has priority over the SMTP
Server Name. To use the SMTP Server Name,
leave the SMTP Server Address blank.
Figure 76: Email Server Setup
Figure 77: Email Server Setup Accepted
89
6-847718-00 Rev. B00