Restore Default Settings - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
Step 2 Click the FTP tab to enter the local upgrade interface.
Step 3 Enter the FTP Server Address in the text field.
Step 4 Click Upgrade to start upgrading.
Step 5 After upgrading is complete, reboot the device to activate the new firmware.

18.6 Restore Default Settings

Step 1 Go to Maintenance > Default.
Step 2 Select the restore type from the following three options.
The device will reboot automatically after restoring to the default settings.
UM NVR v4.xx 111717NA
Figure 18-11 FTP Upgrade Interface
Figure 18-12 Restore Defaults
Restore Defaults: Restore all parameters, except the network (including IP address,
subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and
user account parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to inactive status.
172