HIKVISION DS-9608NI-I8 User Manual page 20

Network Video Recorder User Manual
Unpairing (Disabling) an IR Remote Control from a Device
To unpair an IR remote control from a device so that the unit cannot control any device functions,
proceed as follows:
Press the DEV key on the IR remote control. Any existing Device ID# will be erased from the unit's
memory and it will no longer function with the device.
(Re)-enabling the IR remote control requires pairing to a device. See "Pairing the IR
Remote Control to a Specific Device (optional)," above.
The remote control keys closely resemble the ones on the device front panel. See table
1.4.
UM NVR v4.xx 111717NA
Figure 1-5 Remote Controller
19