Configuring Live View Settings - HIKVISION DS-9608NI-I8 User Manual
Ds-9600ni-i8 series;
ds-9600ni-i16 series;
ds-7600ni-i2 series;
ds-7600ni-i2/p series;
ds-7700ni-i4 series;
ds-7700ni-i4/p series
Hide thumbs
Also See for DS-9608NI-I8:
- User manual (324 pages) ,
- Quick start manual (35 pages) ,
- User manual (213 pages)
Table of Contents
Advertisement
Network Video Recorder User Manual
6.3 Configuring Live View Settings
Live View settings can be customized. You can configure the output interface, dwell time for
screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Step 1 Go to System > Live View > General.
Step 2 Configure the Live View parameters.
Step 3 Click OK to save the settings.
UM NVR v4.xx 111717NA
Figure 6-4 Live View-General
Video Output Interface: Select the video output to configure.
Live View Mode: Select the display mode for Live View, e.g., 2*2, 1*5, etc.
Dwell Time: The time in seconds to wait between switching cameras when using
auto-switch in Live View.
Enable Audio Output: Enable/disable audio output for the selected video output.
Volume: Adjust the Live View volume, playback, and two-way audio for the selected
output.
Event Output: Select the output to show event video.
Full Screen Monitoring Dwell Time: Set the time in seconds to show alarm event
screen.
51
- Quick Links:
- Ds-7700Ni Series
Hide quick links:
Advertisement
Table of Contents
