Setting User Permissions - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
Step 5 Click OK to finish adding the new user account.
Step 6 In the User Management interface, the added new user is displayed on the list.

19.4.2 Setting User Permissions

For an added user, you can assign different permissions, including local and remote
operation of the device.
Step 1 Go to System > User
Step 2 Select a user from the list, and then click
UM NVR v4.xx 111717NA
User Level: Set the user level to Operator or Guest. Different user levels have
•
different operating permission.
Operator
- Operator: An
Remote Configuration and all operating permissions in Camera
Configuration by default.
- Guest: A Guest user has no Two-Way Audio permission in Remote
Configuration and only local/remote playback in the Camera
Configuration by default.
User's MAC Address: The MAC address of the remote PC that logs onto the
•
device. If it is configured and enabled, it allows only the remote user with
this MAC address to access the device.
Figure 19-6 User List
interface.
user level has of Two-Way Audio permission in
to enter the permission settings
177