Configure Ports - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
Step 3 Click Apply.
Step 4 (Optional) Click Test to send a test e-mail.

16.8 Configure Ports

You can configure different types of ports to enable relevant functions.
Step 1 Go to System > Network > Advanced > More Settings and configure port settings as
needed.
UM NVR v4.xx 111717NA
Enable Attached Picture: Check to send e-mail with attached alarm images. The
interval is the time between sending two subsequent alarm images.
Alarm Host IP/Port: With a remote alarm host configured, the device will send the
alarm event or exception message to the host when an alarm is triggered. The
remote alarm host must have the client management system (CMS) software
installed.
The Alarm Host IP refers to the IP address of the remote PC on which the CMS
software (e.g., iVMS-4200) is installed, and the Alarm Host Port (7200 by default)
must be the same as the alarm monitoring port configured in the software.
Server Port: Server port (8000 by default) should be configured for remote client
software access, and its valid range is 2000 to 65535.
HTTP Port: HTTP port (80 by default) should be configured for remote Web browser
access.
Multicast IP: Multicast can be configured to enable Live View for cameras that
exceed the maximum number allowed through network. A multicast IP address
covers Class-D IP ranging from 224.0.0.0 to 239.255.255.255 and it is recommended
to use an IP address ranging from 239.252.0.0 to 239.255.255.255.
When adding a device to the CMS software, the multicast address must be the
same as that of the device.
RTSP Port: RTSP (Real Time Streaming Protocol) is a network control protocol
designed to control streaming media servers. The port is 554 by default.
158