Network Video Recorder User Manual
Step 3 When the eSATA type is set to Record/Capture, enter the storage device
Step 4 Edit the property of the selected eSATA, or initialize it as required.
8.2 Storage Mode
8.2.1 Configuring HDD Groups
Purpose
Multiple HDDs can be managed in groups. Video from specified channels can be
recorded onto a particular HDD group through HDD settings.
Step 1 Go to Storage > Storage Device.
Step 2 Check the checkbox to select the HDD to set the group.
Step 3 Click
UM NVR v4.xx 111717NA
interface.
Figure 8-4 Storage Device
to enter the Local HDD Settings interface.
Figure 8-5 Local HDD Settings
67