Network Video Recorder User Manual
If Admin's password is modified, a dialog box pops up. Optionally, click Yes to duplicate
the password to connected IP cameras.
3.3 Configuring the Login Unlock Pattern
You can configure a device login unlock pattern for the admin user.
Step 1 After the device is activated, enter the following interface to configure the device
unlock pattern.
Step 2 Use the mouse to draw a pattern among the nine dots on the screen. Release the
mouse when the pattern is done.
Connect at least four dots to draw the pattern.
Each dot can be connected only once.
UM NVR v4.xx 111717NA
Figure 3-2 Properly Keep Your Password Reminder
Figure 3-3 Draw the Pattern
29