Intrusion Detection - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
2) Select the Direction as A<->B, A->B, or A<-B.
3) Drag the Sensitivity slider to set the detection sensitivity. The higher the value, the
4) Click Draw Region and set two points in the preview window to draw a virtual line.
Step 7 Set the arming schedule. Refer to Chapter 12.1 Configuring Arming Schedule.
Step 8 Set the linkage actions. Refer to Chapter 12.2 Configuring Alarm Linkage Actions.
Step 9 Click Apply.

13.4 Intrusion Detection

Purpose
The Intrusion Detection Function detects people, vehicles, or other objects that enter and
loiter in a pre-defined virtual region. Specific actions can be taken when an alarm is triggered.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Intrusion.
Step 3 Select a camera to configure.
UM NVR v4.xx 111717NA
A<->B: Only the arrow on the B side shows. An object crossing a configured line in
both directions can be detected and trigger alarms.
A->B: Only an object crossing the configured line from the A side to the B side can
be detected.
B->A: Only an object crossing the configured line from the B side to the A side can
be detected.
more easily the detection alarm will be triggered.
Figure 13-4 Intrusion Detection
129