Network Video Recorder User Manual
19.4.4 Editing the Admin User
You can modify the admin user account's password and unlock pattern.
Step 1 Go to System > User
Step 2 Select the admin user from the list and click Modify.
Step 3 Edit the admin user information as desired, including a new admin password
Step 4 Edit the unlock pattern for the admin user account.
UM NVR v4.xx 111717NA
Figure 19-9 Edit User (Admin)
(strong password is required) and MAC address.
1) Check the Enable Unlock Pattern checkbox to enable the use of an unlock
pattern when logging in to the device.
2) Use the mouse to draw a pattern among the nine dots on the screen, and
release the mouse when the pattern is done.
Refer to Chapter 3.3 Configuring the Login Unlock Pattern for detailed instructions.
181