Vehicle Detection - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
Step 6 Drag the Sensitivity slider to set the detection sensitivity. Sensitivity range: [1-5]. The
higher the value, the more easily the face will be detected.
Step 7 Set the arming schedule. Refer to Chapter 12.1 Configuring Arming Schedule.
Step 8 Set the linkage actions. Refer to Chapter 12.2 Configuring Alarm Linkage Actions.
Step 9 Click Apply.

13.2 Vehicle Detection

Purpose
Vehicle Detection is available for road traffic monitoring. In Vehicle Detection, a passed
vehicle can be detected and the picture of its license plate can be captured. You can send an
alarm signal to notify the surveillance center and upload the captured picture to an FTP
server.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Vehicle.
Step 3 Select a camera to configure.
Step 4 Check Enable Vehicle Detection.
Step 5 Optionally, check Save VCA Picture to save the captured vehicle detection pictures.
Step 6 Set the arming schedule. Refer to Chapter 12.1 Configuring Arming Schedule.
Step 7 Set the linkage actions. Refer to Chapter 12.2 Configuring Alarm Linkage Actions.
UM NVR v4.xx 111717NA
Figure 13-2 Vehicle Detection
127