HIKVISION DS-9608NI-I8 User Manual page 145

Network Video Recorder User Manual
Step 6 Set the connection mode to TCP Reception, UDP Reception, Multicast, RS-232,
UM NVR v4.xx 111717NA
NUCLEUS
•
1) Click Custom to configure the NUCLEUS settings.
2) Enter the employee No. shift No. and the terminal No. in the field. The
matching message sent from the POS device will be used as the valid
POS data.
The NUCLEUS protocol must be used in the RS-232 connection communication.
USB-to-RS-232, or Sniff, and click Parameters to configure the parameters for
each connection mode.
TCP Connection
•
1) When using TCP connection, the port must be set from 1 to 65535, and
the port for each POS machine must be unique.
2) Set the Allowed Remote IP Address of the device sending the POS
message.
Figure 15-3 AVE Settings
144