Setting A Pattern; Calling A Pattern - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual

7.3.5 Setting a Pattern

Purpose
Patterns can be set by recording the movement of the PTZ. You can call the pattern to
make the PTZ move according to the predefined path.
Step 1 Click
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Pattern to configure a pattern.
Step 4 Select the pattern No. in the text field.
Step 5 Set the pattern.
Step 6 Repeat steps 3-4 to set more patterns.

7.3.6 Calling a Pattern

Purpose
Follow the procedure to move the PTZ camera according to the predefined patterns.
Step 1 Click
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Pattern.
UM NVR v4.xx 111717NA
on the quick settings toolbar of the PTZ camera's Live View.
Figure 7-12 Pattern Configuration
1) Click Record to start recording.
2) Click corresponding buttons on the control panel to move the PTZ camera.
3) Click Stop to stop recording. The PTZ movement is recorded as the pattern.
on the quick settings toolbar of the PTZ camera's Live View.
60