Configuring Pos Event Triggered Recordings; Configuring Picture Capture - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual

8.9 Configuring POS Event Triggered Recordings

You can configure recordings triggered by connected POS events such as transactions, etc.
Step 1 Go to System > POS Settings.
Step 2 Configure the POS and select the channel(s) in Event Linkage to trigger the recording
when a POS event occurs.
Step 3 Refer to Chapter 14 Smart Analysis for details.
Step 4 Go to Camera > Encoding Parameters > Recording Parameters.
Step 5 Set the event main stream/sub-stream recording parameters for the camera.
Step 6 Go to Storage > Recording Schedule.
Step 7 Set the record type to POS Event.
Step 8 Set the schedule for the POS event triggered recording. Refer to Chapter 8.4 Configuring
Recording Schedule for details.

8.10 Configuring Picture Capture

Step 1 Picture refers to live picture capture in continuous or event recordings.
Step 2 Go to Camera > Encoding Parameters > Capture.
Step 3 Set the picture parameters.
Step 4 Go to Storage > Capture Schedule.
Step 5 Select the camera for which to configure picture capture.
UM NVR v4.xx 111717NA
Resolution: Set the resolution of the picture to capture.
Picture Quality: Set the picture quality to low, medium, or high. A higher picture
quality requires more storage space.
Interval: The interval of capturing live pictures.
80