Restore Default Settings; System Service; Network Security Settings - HIKVISION DS-7700NXI-I/S Series User Manual

18.6 Restore Default Settings

Step 1 Go to Maintenance > Default.
Step 2 Select the restoring type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address, subnet
mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account
parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to the inactive status.
The device will reboot automatically after restoring to the default settings.

18.7 System Service

18.7.1 Network Security Settings

Disable SADP Services
Purpose
You can disable SADP service to enhance the access security, e.g., when you are in an untrusted
network environment.
Step 1 Go to System > System Service > System Service.
Step 2 Uncheck Enable SADP to disable the service.
Network Video Recorder User Manual
Figure 18-12 Restore Defaults
165