Object Removal Detection - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
3) Click Draw Region and draw a quadrilateral in the preview window by specifying
Step 7 Set the arming schedule. Refer to Chapter 12.1 Configuring Arming Schedule.
Step 8 Set the linkage actions. Refer to Chapter 12.2 Configuring Alarm Linkage Actions.
Step 9 Click Apply.

13.8 Object Removal Detection

Purpose
The Object Removal Detection function detects objects removed from a pre-defined region
such as exhibits on display, and a series of actions can be taken when the alarm is triggered.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Object Removable.
Step 3 Select a camera to configure.
Step 4 Check Enable Object Removable Detection.
Step 5 Optionally, check Save VCA Picture to save the captured object removable detection
pictures.
Step 6 Follow these steps to set the detection rules and detection areas.
1) Select an Arming Region to configure. Up to four regions are selectable.
2) Drag the sliders to set Time Threshold and Sensitivity.
UM NVR v4.xx 111717NA
four vertices of the detection region.
Figure 13-8 Object Removal Detection
134