Network Video Recorder User Manual
Step 3 Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.
If the two patterns are different, you must set the pattern again.
3.4 Log In to the Device
3.4.1 Log In via the Unlock Pattern
Step 1 Right-click the mouse and select the menu to enter the interface.
Step 2 Draw the pre-defined pattern to unlock and enter the menu operation.
UM NVR v4.xx 111717NA
admin
Only the
user has permission to unlock the device.
Configure the pattern before unlocking. Refer to Chapter 3.3 Configuring the Login
Unlock Pattern.
Figure 3-4 Draw the Unlock Pattern
If you have forgotten your pattern, select Forgot My Pattern or Switch User to enter
the normal login dialog box.
30