Network Video Recorder User Manual
Before You Start
At least one available physical disk must exist to rebuild an array.
Step 1 Go to Storage > RAID Setup > Array.
Step 2 Click
Step 3 Select the available physical disk.
Step 4 Click OK.
Step 5 Click OK on the pop up message box "Do not unplug the physical disk when it is
9.3 Deleting an Array
Deleting an array will delete all data saved to it.
Step 1 Go to Storage > RAID Setup > Array.
UM NVR v4.xx 111717NA
of the degraded array.
Figure 9-8 Rebuild Array
under rebuilding."
Figure 9-7 Array List
88