Restore Default Settings; Schedule Reboot - HIKVISION DS-8600NXI-I8/S Series User Manual

14.9 Restore Default Settings

Steps
1. Go to Maintenance → Default.
2. Select the restore type from the following three options.
Restore Defaults
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the
factory default settings.
Factory Defaults
Restore all parameters to the factory default settings.
Restore to Inactive
Restore the recorder to inactive status.
Note
The recorder will reboot automatically after restoring to the default settings.

14.10 Schedule Reboot

The device will automatically restart according to the schedule.
Steps
1. Go to Maintenance → System Service → System Service → Schedule Reboot.
2. Check Enable.
3. Set the reboot schedule.
4. Click Apply.
Network Video Recorder User Manual
Figure 14-19 Restore Default Settings
184