Network Video Recorder User Manual
Chapter 15 POS Configuration
The device can be connected to a POS machine/server and receive a transaction message to
overlay on the image during Live View or playback, as well as trigger a POS event alarm.
The POS feature is supported by DS-9600/7700/7600-I (/P) Series devices only.
15.1 Configuring POS Settings
15.1.1 Configuring POS Connection
Step 1 Go to System > POS Settings.
Step 2 Click Add to enter the POS adding interface.
Step 3 Select a POS device from the drop-down list.
Step 4 Check Enable.
Step 5 Set the POS protocol to Universal Protocol, EPSON, AVE, or NUCLEUS.
UM NVR v4.xx 111717NA
The number of POS devices supported by each device is half of its number of
channels, e.g., Eight POS devices are supported by the DS-9616NI-I8 model.
When a new protocol is selected, reboot the device to activate the new settings.
Universal Protocol
•
Click Advanced to expand more settings when selecting the universal
protocol. You can set the start line identifier, line break tag, and end line
tag for the POS overlay characters, and the case-sensitive property of the
characters. You can also optionally check the filtering identifier and the XML
protocol.
Figure 15-1 POS Settings
142