One-Touch Park - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
Purpose
Follow the procedure to call the linear scan in the predefined scan range.
Step 1 Click
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Linear Scan to start the linear scan and click it again to stop it.
Step 4 (Optional) Click Restore to clear the defined left limit and right limit data.

7.3.9 One-Touch Park

Purpose
Certain speed dome models can be configured to start a predefined park action (scan,
preset, patrol, etc.) automatically after a period of inactivity (park time).
Step 1 Click
Step 2 The PTZ control panel displays on the right of the interface.
Step 3 Click Park (Quick Patrol), Park (Patrol 1), or Park (Preset 1) to activate the park
UM NVR v4.xx 111717NA
on the quick settings toolbar of the PTZ camera's Live View.
Reboot the camera to have the settings take effect.
Before operating this function, make sure the connected camera supports linear
scan and is in HIKVISION protocol.
on the quick settings toolbar of the PTZ camera's Live View.
action.
Park (Quick Patrol): The dome starts patrolling from the predefined preset 1
•
to preset 32 in order after the park time. Undefined presets will be skipped.
Park (Patrol 1): The dome starts moving according to the predefined patrol 1
•
path after the park time.
Park (Preset 1): The dome moves to the predefined preset 1 location after
•
the park time.
The park time can be set only via the speed dome configuration interface. The
default value is 5s.
62