Chapter 3 Getting Started; Starting The Device - HIKVISION DS-9608NI-I8 User Manual
Ds-9600ni-i8 series;
ds-9600ni-i16 series;
ds-7600ni-i2 series;
ds-7600ni-i2/p series;
ds-7700ni-i4 series;
ds-7700ni-i4/p series
Hide thumbs
Also See for DS-9608NI-I8:
- User manual (324 pages) ,
- Quick start manual (35 pages) ,
- Quick start manual (38 pages)
Table of Contents
Advertisement
Network Video Recorder User Manual
Chapter 3 Getting Started
3.1 Starting the Device
Purpose
Proper startup and shutdown procedures are crucial to expanding the life of the device.
Before You Start
Check that the voltage of the extra power supply matches the device's requirement and the
ground connection is working properly.
Powering Up the Device
Step 1 Check that the power supply is plugged into an electrical outlet. It is HIGHLY
recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with
the device. The Power indicator LED on the front panel should be red, indicating the
device is receiving power.
Step 2 Press POWER on the front panel. The Power indicator LED should turn blue indicating
that the unit is starting.
Step 3 After startup, the Power indicator LED remains blue. A splash screen with the status of
the HDD appears on the monitor. The row of icons at the bottom of the screen shows
the HDD status. 'X' means that the HDD is not installed or cannot be detected.
UM NVR v4.xx 111717NA
27
- Quick Links:
- Ds-7700Ni Series
Hide quick links:
Advertisement
Table of Contents
