Network Video Recorder User Manual
Chapter 18 System Maintenance
18.1 Storage Device Maintenance
18.1.1 Configuring Disk Clone
Purpose
Select the HDDs to clone to the eSATA HDD.
Before You Start
Connect an eSATA disk to the device.
Step 1 Go to Maintenance > HDD Operation > HDD Clone.
Step 2 Check the HDD to clone. The capacity of the selected HDD must match the
Step 3 Click Clone.
Step 4 Click Yes on the popup message box to continue creating the clone.
UM NVR v4.xx 111717NA
Figure 18-1 HDD Clone
capacity of the clone destination.
163