Configuring Snmp - HIKVISION DS-9608NI-I8 User Manual
Ds-9600ni-i8 series;
ds-9600ni-i16 series;
ds-7600ni-i2 series;
ds-7600ni-i2/p series;
ds-7700ni-i4 series;
ds-7700ni-i4/p series
Hide thumbs
Also See for DS-9608NI-I8:
- User manual (324 pages) ,
- Quick start manual (35 pages) ,
- User manual (324 pages)
Table of Contents
Advertisement
Network Video Recorder User Manual
Step 2 Check Enable.
Step 3 Configure NTP settings as need.
Step 4 Click Apply.
16.6 Configuring SNMP
Purpose
You can configure SNMP settings to get device status and parameter information.
Before You Start
Download the SNMP software to receive device information via the SNMP port. By setting the
trap address and port, the device is allowed to send alarm events and exception messages to
the surveillance center.
Step 1 Go to System > Network > Advanced > SNMP.
UM NVR v4.xx 111717NA
Interval (min): Time interval between two time synchronization with NTP server
NTP Server: IP address of the NTP server
NTP Port: Port of the NTP server
Figure 16-5 NTP Settings
155
- Quick Links:
- Ds-7700Ni Series
Hide quick links:
Advertisement
Table of Contents
