Rebuilding An Array - HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
Step 3 Input the array name.
Step 4 Select RAID Level as RAID 0, RAID 1, RAID 5, RAID 6, or RAID 10 as required.
Step 5 Select the physical disks to constitute the array.
Table 9-1 Required Number of HDDs
RAID Level
RAID 0
RAID 1
RAID 5
RAID 6
RAID 10
Step 6 Click OK.
Step 7 Optionally, the device will automatically initialize the created array. Go to

9.2 Rebuilding an Array

Purpose
The array status includes Functional, Degraded, and Offline. To ensure the high security and
reliability of the data stored in an array, take immediate and proper maintenance of the array
according its status.
UM NVR v4.xx 111717NA
Figure 9-3 Create Array Window
Required Number of HDDs
At least 2 HDDs
At least 2 HDDs
At least 3 HDDs
At least 4 HDDs
The number of HDDs must be an even range from 4 to 16.
Storage > RAID Setup > Array to view the information of the created array.
Figure 9-4 Array List
86