Network Video Recorder User Manual
Step 9 After having successfully added the IP SAN disk, return to the HDD Information
8.1.3 Configuring eSATA for Data Storage
When there is an external eSATA device connected to the device, you can configure
eSATA for data storage, and you can manage the eSATA in the device.
Step 1 Click Storage > Advanced.
Step 2 Set the eSATA type to Export or Record/Capture from the drop-down eSATA list.
UM NVR v4.xx 111717NA
Figure 8-2 Add IP SAN Disk
menu. The added NetHDD will be displayed in the list.
If the installed HDD or NetHDD is uninitialized, select it and click Init for
initialization.
Export: Use the eSATA for backup.
•
Record/Capture: Use the eSATA for record/capture. Refer to the following
•
steps for operating instructions.
Figure 8-3 Set eSATA Mode
66