Instructions For F5 Profinet Operator To Simatic S7; Standard Project Design; Figure 5: Simatic Info Window - KEB COMBIVERT F5 Instructions For Use Manual

STANDARD PROjEcT DESIGN

8 Instructions for F5 PROFINET operator to Simatic S7

Simatic is a product group of Siemens AG. This short overview make no claim to be
exhaustive, nor replace the original documents of the company Siemens to this issue!
Please note in particular the issue project design of the clock synchronization (PROF-
INET IO) in the S7 help. The project design of a synchronous PROFINET communica-
tion (PROFINET IO-IRT) is more extensive than the project design for a PROFINET
IO-RT communication. The following example is used to specify the steps for the project
design of such IRT communication. All pictures are screenshots of a Siemens Step7-Si-
matic-Manager software with the version.
Figure 5:
8.1 Standard project design
From software V2.8 of the F5 PROFINET operator the following communication func-
tions are possible:
•
•
All information about the available functions of the PROFINET protocol receives the
PROFINET controller (master) via the unit description file (GSDML) of the slave.There-
fore, first it is necessary to import the unit description file of the slave to be connected
into the control system. This is done at the Siemens Simatic S7 in the so-called HW
config via menu Extras-> install GSD-files.
SIMATIC Info window
Exchange acyclic data (parameter channel) to PROFIdrive profile
Exchange cyclic data (process data channel) with PROFINET IO-RT or PROFINET
IO-IRT
59