KEB COMBIVERT F5 Instructions For Use Manual page 39

PARAMETER DEScRIPTION
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
OS11
NetX_FwVersion
Indicates the actual loaded firmware version of the installed ProfiNet Asics.
018Bh
0
Uint32
1
Depending on the delivered PROFINET firmware version
OS12
Serial number (IM)
Indicates the serial number of the F5 ProfiNet operator.
018Ch
0
Uint32
1
0
The suffix (IM) in the parameter name indicates that this value is part of the
identification and maintenance parameters.
OS14
NodeSwitchVal
Indicates the actual adjustment at the two hex-coded node address switches.
018Eh
0
Uint8
1
Depending on switch position.
The value of this parameter affects the PROFINET name.
OS15
Pnet_IPAddress
Indicates the actual IP address of the F5 PROFINET operator.
018Fh
0
Uint32
4-byte IP address
0.0.0.0
The last assigned IP address by the PROFINET controller is stored non-vola-
tile and remains active at the next start-up.
39