KEB COMBIVERT F5 Instructions For Use Manual page 55

PARAMETER DEScRIPTION
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
Fb28
1st PDOUT map
Specifies the PDOUT mapping. The parameter is set-programmable.
029Ch
Subindex
Bit-coded
FBS Config.Bit6 = 0 FBS Config.Bit6 = 1
0
1
2
4
8
16
32
64
128
b31...b24 b23...b16
PNU
Pnu: Parameter address of the mapped parameter
Subindex:Parameter subindex of the mapped parameter
Subindex = 0 →
Subindex = 1 →
Subindex = 2 →
Subindex = 3 →
Subindex = 4 →
Subindex = 5 →
Subindex = 6 →
Subindex = 7 →
Subindex = 8 →
Multiple mappings are not possible.
Bit length: The mapped data length in bit, only the values = 16.32 are permis-
sible here
0
A changed value is immediately stored non-volatile.A changed mapping entry
furthermore causes the shutdown of the corresponding mapping and the set-
ting of parameter 1st PDOUT map cout = 0. Gaps are not supported by this
structure, i.e. there is no way to declare a mapping inactive.
Linear
0 addressed the 1th mapping
1 addressed the 1th mapping
2 addressed the 2nd mapping
3 addressed the 3rd mapping
4 addressed the 4th mapping
5 addressed the 5th mapping
6 addressed the 6th mapping
7 addressed the 7th mapping
8 addressed the 8th mapping
Uint32
b15...b8
Subindex
Parameter is mapped in set0
Parameter is mapped in set0
Parameter is mapped in set1
Parameter is mapped in set2
Parameter is mapped in set3
Parameter is mapped in set4
Parameter is mapped in set5
Parameter is mapped in set6
Parameter is mapped in set7
Meaning
b7...b0
Bit length
55