KEB COMBIVERT F5 Instructions For Use Manual page 56

PARAMETER DEScRIPTION
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
56
Fb29
1st PDOUT map count
Indicates how much PDOUT mapping entries shall be activated in 1st PD-
OUT1 map.
029Dh
0
Uint8
1
A changed value is stored immediately active and non-volatile.
Fb30
1st PDIN map
Specifies the Pdin mapping. The parameter is set-programmable.
029Eh
see Fb28
Uint32
see Fb28
0
A changed value is immediately stored non-volatile.A changed mapping entry
furthermore causes the switch off of the corresponding mapping and setting
of parameter 1st PDIN map cout = 0. Gaps are not supported by this struc-
ture, i.e. there is no way to declare a mapping inactive.
Fb31
1st PDIN map count
Indicates how much PDOUT mapping entries shall be activated in 1st map.
029Fh
0
Uint8
1
A changed value is stored immediately active and non-volatile.