Figure 12: Set Synchronization Role; Figure 13: Selection Of The Transmission Clock - KEB COMBIVERT F5 Instructions For Use Manual

ADDITIONAL PROjEcT DESIGN FOR SyNcHRONOUS cOMMUNIcATION AccORDING PROFINET IO-IRT
It makes sense to set the transmit clocking to 2ms, because this corresponds to the
minimum setting of the KEB F5 PROFINET slave. Furthermore the KEB slave is se-
lected here (click on ,kebf5-1') and configured as follows via clicking the button ,unit
characteristics':
Figure 12:
Then the domain management is configured as follows:
Figure 13:
64
Set synchronization role
Selection of the transmission clock