Basic Safety Instructions; Target Group; Transport, Storage And Proper Use - KEB COMBIVERT F6 Series Instructions For Use Manual

bASIC SAFETy INSTRUCTIONS

1 basic Safety Instructions
The COMBIVERT is designed and constructed in accordance with state-of-the-art tech-
nology and the recognized safety rules and regulations However, the use of such de-
vices may cause functional hazards for life and limb of the user or third parties, or dama-
ges to the system and other material property.
The following safety instructions have been created by the manufacturer for the area of
electric drive technology. They can be supplemented by local, country- or application-
specific safety instructions. This list is not exhaustive. Violation of the safety instructions
by the customer, user or other third party leads to the loss of all resulting claims against
the manufacturer.
NOTICE

1.1 Target group

This instruction manual is determined exclusively for electrical personnel. Electrical per-
sonnel for the purpose of this instruction manual must have the following qualifications:
•
•
•
•
•
•
•

1.2 Transport, storage and proper use

The transport is carried out by qualified persons in accordance with the environmental
conditions specified in this manual. Drive controller shall be protected against excessive
strains.
NOTICE
14
Hazards and risks through ignorance.
► Read the instructions for use !
► Observe the safety and warning instructions !
► If anything is unclear, please contact KEB Automation KG !
Knowledge and understanding of the safety instructions.
Skills for installation and assembly.
Start-up and operation of the product.
Understanding of the function in the used machine.
Detection of hazards and risks of the electrical drive technology.
Knowledge of
DIN IEC 60364-5-54.
Knowledge of national safety regulations.
Transport of drive controllers with an edge length >75 cm
The transport by forklift without suitable tools can cause a deflection of the heat
sink. This leads to premature aging or destruction of internal components.
► Transport of drive controllers on suitable pallets.
► Do not stack drive controllers or burden them with other heavy objects.
Damage to the coolant connections
bending of the tubes!
► Never place the device on the coolant connections