KEB COMBIVERT F5 Instructions For Use Manual page 57

PARAMETER DEScRIPTION
ID:
Name:
Meaning
Parameter number (PNU):
Subindex:
Data type:
Coding:
Standard value:
Note:
Fb32
Pnet_PDOUT_Config
Specifies the required PROFINET PDOUT configuration
02A0h
0
Uint32
b31...b24 b23...b16
Module-Id Submodule-Id
00000000h: ‚Not used', setting in accordance with Fb11
81400002h: ‚1x16BitOut'
81410004h: ‚2x16BitOut'
81420006h: ‚3x16BitOut'
03020008h: ‚4x16BitOut'(*1)
8144000Ah: ‚5x16BitOut'
8145000Ch: ‚6x16BitOut'
8146000Eh: ‚7x16BitOut'
05040010h: ‚8x16BitOut'(*1)
(*1): These values are downward compatible and offer the possibility to use
the new Fb33 with an 'old' GSDML.
0: Setting in accordance with Fb11
A changed value is immediately stored non-volatile, but it becomes active
only at the next switch on. If bit 5 of parameter Fb01 FBS Config is set, only
the value compatible with the process data length of the set PD mapping can
be adjusted in parameter Fb32. However, deactivating of parameter Fb32
(value = 0) is always possible.
b15...b8 b7...b0
reserved Pd-length
57