Break-In Function; D Semi Break-In Operation; D Full Break-In Operation - Icom IC-7700 Instruction Manual

■ Break-in function

D D Semi break-in operation
[DELAY] (outer control)
BK-IN
[KEY SPEED] (inner control)
D D Full break-in operation
CW
FUNCTIONS FOR TRANSMIT
The break-in function is used in CW mode to automat-
ically toggle the transceiver between transmit and re-
ceive when keying. The IC-7700 is capable of full
break-in or semi break-in.
During semi break-in operation, the transceiver imme-
diately transmits when keyed and during key up peri-
ods returns to receive after a pre-set delay.
q Push
to select CW or CW-R mode.
CW
w Push
once or twice to turn the semi break-in
BK-IN
function ON.
• " " appears.
BKIN
e Rotate [DELAY] to set the break-in delay time (the
delay from transmit to receive).
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
During full break-in operation, the transceiver immedi-
ately transmits when keyed and during key up periods
immediately returns to receive.
q Push
to select CW or CW-R mode.
CW
w Push
once or twice to turn the full break-in
BK-IN
function ON.
• " " appears.
F-BKIN
When using a paddle, rotate [KEY SPEED] to adjust
the keying speed.
6-3
6