Turning On The Auto Repeater Function; Storing A Non-Standard Repeater - Icom IC-9100 Instruction Manual

D
When the operating frequency falls within the repeater
output frequency range, the Auto Repeater function
automatically sets the repeater settings (duplex ON/
OFF, duplex direction, tone encoder ON/OFF).
q Hold down [MENU] for 1 second to enter the Set
mode.
w Push [Y](F-1) or [Z](F-2) to select "Auto Re-
peater."
e Rotate [MAIN DIAL] to turn ON the Auto Repeater
function.
r Push [MENU] to save, and exit the Set mode.
D
q Turn OFF the Auto Repeater function in the Set
mode. (p. 163)
w Push [A/B] to select VFO A.
e Rotate [MAIN DIAL] to set the repeater output fre-
quency.
r Push [A/B] to select VFO B.
t Rotate [MAIN DIAL] to set the repeater input fre-
quency.
y Push [A/B] to select VFO A.
u Push [SPLIT] to turn ON the Split function.
i Push [TON](F-4) to turn ON the previously set tone
encoder.
o Rotate [M-CH] to select the desired memory chan-
nel.
!0 Hold down [MW] for 1 second to store the set con-
tents into the selected memory channel.
RECEIVE AND TRANSMIT
[ ] [ ]
[MENU]
SET A u t o R e p e a t e r
Ù Ú
20
ON–1 (default for the U.S.A. version)
[A/B] [SPLIT]
[TON]
4
[MAIN DIAL]
O N – 1
[MW]
[MAIN DIAL] [M-CH]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
68