D Transmit Frequency Monitor Check; D Auto Repeater Function (Usa Version Only) - Icom IC-7000 Instruction Manual

4
RECEIVE AND TRANSMIT

D Transmit frequency monitor check

You may be able to receive the other party's transmit
signal directly (called 'listening on the repeater input')
without having to go through a repeater.
Transmit frequency monitor check (XFC) allows you
to check this.
[MENU/GRP]
q Select M-1.
• Hold down [MENU/GRP] for 1 second once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times
to select the menu M-1.
w While receiving, hold down [F-4 XFC] to see if
you can receive the other party's transmit signal
directly.
• While holding down [F-4 XFC], the offset direction
and frequency are displayed above the multi-function
key indicator.

D Auto repeater function (USA version only)

This function automatically activates the repeater
settings (DUP– or DUP+ and/or tone encoder ON/
OFF) when the operating frequency falls within
the general repeater output frequency range and
deactivates them when outside of the range.
Set the auto repeater function ON-1 (auto duplex
setting) or ON-2 (auto duplex setting and activating
tone encoder) in the miscellaneous (others) Set
mode in advance (p. 130). When ON-1 or ON-2
are turned on, repeater settings are automatically
activated according to the table below right.
ON-1 sets the duplex setting and ON-2 sets the
duplex setting and tone encoder automatically.
q Push [AF( )] momentarily to enter the Set
set
mode menu.
w Push [F-4 OTH] to enter the miscellaneous
(others) Set mode.
e P u s h [ F - 1 ≤ ] o r [ F - 2 ≥ ] t o s e l e c t " A u t o
Repeater."
r Rotate [DIAL] to select the desired auto repeater
condition from ON-1, ON-2 and OFF.
• Hold down [F-4 DEF] for 1 second to return to default
setting.
t Push [Z(
menu/grp
operating mode.
65
[F-4]
)] twice to return to the normal
SPCH TUNER
/LOCK /CALL
1�8 3�5
1 2
10 14
4 5
21 24
7 8
50 � 144
0
[AF]
[MENU/GRP] [F-1] [F-2] [F-4]
• Frequency range and offset direction (for USA)
FREQUENCY RANGE
51.620–51.999999 MHz
52.500–52.999999 MHz
53.500–53.999999 MHz
145.200–145.499999 MHz
146.610–146.999999 MHz
147.000–147.399999 MHz
442.000–444.999999 MHz
447.000–449.999999 MHz
XFC
XFC
MW
V/M
F-2
F-1
7
MODE
3
18
FIL
6
28
9 GENE
430
F-INP
CE ENT
HM-151
1�8 3�5
1 2
10 14
4 5
21 24
[DIAL]
7 8
50 � 144
0
DUPLEX DIRECTION
minus duplex
minus duplex
plus duplex
plus duplex
minus duplex
MODE
7
MODE
3
18
FIL
6
28
GENE
9
430
F-INP
CE ENT