Introduction
This manual is intended for professionally trained operators of Christie high-brightness CP4415-RGB
and CP4420-RGB Gen2 projection systems.
Only trained Christie qualified technicians who are knowledgeable about the hazards associated with
high-voltage, laser safety, and the high temperatures generated by the projector are authorized to
assemble and install the projector. Only Christie qualified technicians are authorized to service the
projector.
For complete product documentation and technical support, go to www.christiedigital.com.
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
Digital Systems USA Inc. website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
•
Go to this URL: https://bit.ly/3vxrm4Y or
https://www.christiedigital.com/products/cinema/projection/cinelife-plus-series/.
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on the projector is available in the following documents.
•
CineLife+ User Guide (P/N: 020-103073-XX)
•
CineLife+ 4K-RGB Product Safety Guide (P/N: 020-103243-XX)
•
CP4415-RGB and CP4420-RGB Gen2 Service Guide (P/N: 020-103774-XX)
•
CineLife+ Serial Commands Guide (P/N: 020-103075-XX)
Models
•
CP4415-RGB Gen2
•
CP4420-RGB Gen2
CP4415-RGB and CP4420-RGB Gen2 Installation and Setup Guide
020-103773-01 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
6