Introduction
This manual is intended for professionally trained operators of Christie high-brightness Cinema 2K-RBe
projection systems.
Only trained Christie qualified technicians who are knowledgeable about the hazards associated with
high-voltage, laser safety, and the high temperatures generated by the projector are authorized to
assemble and install the projector. Only Christie qualified technicians are authorized to service the
projector.
For complete product documentation and technical support, go to www.christiedigital.com.
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
Digital Systems USA Inc. website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
•
Go to this URL: https://bit.ly/3vxrm4Y or
https://www.christiedigital.com/products/cinema/projection/cinelife-plus-series/.
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on this product is available in the following documents.
•
Cinema 2K-RBe Service Guide (P/N: 020-103908-XX)
•
CineLife+ 2.0 User Guide (P/N: 020-103845-XX)
•
CineLife+ Serial Commands Guide (P/N: 020-103075-XX)
Important safeguards
To prevent personal injury and to protect the device from damage, read and follow these safety
precautions. This projector is intended for use in a cinema environment.
Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe
020-103907-01 Rev. 1 (03-2024)
Copyright
©
2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
6