Table of Contents
Advertisement
Introduction
This manual is intended for professionally trained operators of Christie high-brightness projection
systems.
The illustrations in this document are for representation only and may not depict your projector model
exactly.
Only Christie qualified technicians who are knowledgeable about the hazards associated with laser use,
high-voltage, and the high temperatures generated by the projector lasers are authorized to
assemble, install, and service the projector.
For complete Christie Griffyn Series product documentation and technical support, go to
www.christiedigital.com.
Models
The following models are supported for the Christie Griffyn Series.
•
Griffyn 4K32-RGB
•
Griffyn 4K35-RGB
•
Griffyn 4K50-RGB
Product documentation
For installation, setup, and user information, see the product documentation available on the Christie
website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
•
Go to this URL: https://bit.ly/3fbZLx8 or
https://www.christiedigital.com/products/projectors/all-projectors/griffyn-series/.
•
Scan the QR code using a QR code reader app on a smartphone or tablet.
2. On the product page, select the model and switch to the Downloads tab.
Related documentation
Additional information on this product is available in the following documents.
•
Christie Griffyn Series Product Safety Guide (P/N: 020-103313-XX)
Christie Griffyn Series Installation and Setup Guide
020-103314-12 Rev. 1 (07-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
6
Advertisement
Table of Contents
