Machine Parameters; What Is A Machine Parameter; The Machine Parameter Editor - HEIDENHAIN iTNC 530 Service Manual

30 Machine Parameters

30.1 What is a Machine Parameter?

A contouring control must have access to specific data (e.g., traverse distances, acceleration)
before it can execute its programmed instructions. You define these data in what are known as
machine parameters.
This list of machine parameters is divided into groups according to topic.
Machine Parameters
10 to 999
1000 to 1399
1400 to 1699
1700 to 1999
2000 to 2999
3000 to 3999
4000 to 4999
5000 to 5999
6000 to 6199
6500 to 6599
7100 to 7199
7200 to 7349
7350 to 7399
7400 to 7599
7600 to 7699
13000 to 13999
If there is more than one input value for a single function (e.g., a separate input for each
axis), the parameter number is extended by indices. Index zero is always axis 1, index one is
axis 2, etc.
Example:
MP1010.0-8
MP1010.0
MP1010.1
MP1010.2
MP1010.3
MP1010.4
MP1010.5
MP1010.6
MP1010.7
MP1010.8
Enter into OEM.SYS, using the code word AXISNUMBER =, the number of axes being used or
intended, so that only the necessary index parameters are displayed.
With other machine parameters you can activate specific functions. In this case, the parameters
serve as on/off switches for these functions. These parameters are bit-encoded. Each bit is
assigned either to an axis or a function, e.g., MP 10 : %00000000011111 ; active axes
May 2006
Topics
Encoders and machines
Positioning
Operation with velocity feedforward control
Operation with following error (servo lag)
Integrated speed and current control
Spindle
Integral PLC
Data interface
3-D touch probe
Tool Measurement with triggering touch probe
Tapping
Programming and display
Color
Machining and program run
Hardware
Second spindle
Rapid traverse
Rapid traverse for axis 1
Rapid traverse for axis 2
Rapid traverse for axis 3
Rapid traverse for axis 4
Rapid traverse for axis 5
Rapid traverse for axis 6
Rapid traverse for axis 7
Rapid traverse for axis 8
Rapid traverse for axis 1
30 – 465